Are you searching for a Mission Viejo Structural Welding Deputy Special Inspector? We can help! We at Deputy Special Inspections Mission Viejo are certified and experienced in this discipline through the American Welding Society and the International Code Council. With years of knowledge and expertise, we are here to help you whether it be for a commercial or residential project. You can contact us directly through our website, social media or phone number at (949) 616-8287 for a free Structural Steel and Bolting consultation in Mission Viejo California!
As a Structural Welding Deputy Special Inspector, it is critical to inspect welding being performed before it starts, during the work in progress and after it is finished. The reason why this it is so essential to inspect before welding starts in a structural component is to ensure that the contractor is using acceptable welding parameters, materials and procedures per approved plan and specifications. It is also essential to verify that the welding being done is performed by a certified welder with the correct and applicable WPS’s, WQTR’s and PQR’s. The reason why it is essential to inspect throughout the work in progress is to ensure that welding is performed per approved plans and specifications such as multiple welding processes that require slag removal in multi-pass welds. Last but not least, it is essential to inspect after welding is done to ensure welds implemented in structures do not have cracks, defects or deficiencies after being fully cooled down. These are only a few reasons why structural welding inspection is so imperative during the many phases of the process.
Whether you need a Deputy Special Inspector for a commercial or residential project, we are here to help you! Need a shop weld inspection? A field weld inspection? We are certified, experienced and knowledgeable in these areas! It is our job to ensure that all welds are welded per approved plans and specifications with the correct lengths, sizes, locations. Prior to welding, it is also our responsibility to verify joint preparations and joint fit ups to the applicable requirements specified in the approved plans. We ensure that once welds have been identified and accepted, a distinguishing mark or other recording method shall be placed on all applicable parts or joints.
Welds that need Nondestructive Testing Examination (NDE) or Nondestructive Testing (NDT) in addition to visual welding inspection shall be performed by approved plans and specifications. We ensure that if approved plans require NDE, we as the welding deputy special inspector will check and inform the applicable parties who may not be aware of this requirement for scheduling purposes.
We understand that there are a variety of welding connections that are either partial joint penetrations or complete joint penetrations, fillet welds or groove welds, tubular or non-tubular connections, etc. That is why it is vital to schedule us here at Deputy Special Inspections Mission Viejo as soon as possible to verify welding is being done correctly and efficiently if approved plans and specifications require it.