Mission Viejo, CA

Mission Viejo Structural Steel & Bolting Deputy Special Inspection

structural steel and bolting deputy special inspection in mission viejo, CA
Deputy Special Inspection in Mission Viejo, CA

Are you looking for a Mission Viejo Structural Steel and Bolting Special Deputy Special Inspector? Then you’ve come to the right website! We at Deputy Special Inspections Mission Viejo are certified and experienced in this discipline through the International Code Council. With years of practical knowledge, we are here to assist you whether it be for a commercial or residential project. You can contact us directly through our website, social media or phone number at (949) 616-8287 for a free Structural Steel and Bolting consultation in Mission Viejo California!

As a certified structural steel and bolting deputy special inspector, it is our job in verifying that appropriate details in any set of approved plans and specifications are implemented. Whether it be for high-strength bolt fastening of steel or slip critical joints of framing or structural steel components of a building, we at Deputy Special Inspection Mission Viejo will evaluate the statement of special inspections in the approved set of plans and specifications. It is our duty to authenticate that the contractor, if applicable, is installing high-strength bolts per permitted plans and specifications. If any material sampling or tests are necessary, we make it our job to perform these duties. When all is concluded, we ensure that a report is submitted stating whether work is in compliant or noncompliant. This same report should than be submitted to the building official, contractor, and/or registered design professional.

Here at Deputy Special Inspections Mission Viejo, it is also our duty as a Structural Steel and Bolting Inspector to confirm that the correct materials are being connected such as steel shapes, bolts sizes, bolt grades and bolt types. These construction materials must be in compliance with the approved plans and specifications. These materials shall also be in an acceptable condition with no discontinuities found or a noncompliance report will have to be issued.

If sampling material is needed, we can be of assistance! We can help to confirm required type, location, frequency and quantities of tests needed to be executed. A written report stating that samples were identified and tested will be sent in either electronically or hand written. Samples that need to be transferred to the lab safely will be done by our team. We ensure that testing will be accomplished on materials as required by applicable standards and specifications.

Arriving upon any site requesting a structural steel and bolting deputy inspector, it is our duty to verify correct sizes, types, and location of bolts and bolt holes with washers, and nuts for applicable connections stated on the approved plans and specifications. It is also our duty to confirm that storage of bolts, nuts, and washers are protected as required by code.

Prior to connection of high strength bolts, it is our job to check that any faying surfaces at high strength bolting connections or slip critical joints are in agreement with applicable standards. If mandatory to conduct bolt tension observation, we will witness or conduct bolt tension verification tests on required high-strength bolt assemblies with the approved method and sequence of bolt tightening.

Last but not least, when we are on site as requested by a client, we are to verify that installed column base plates have the acceptable design configuration, correct hole sizes, proper clearance for grouting and securely placed in accordance with applicable specifications and plans.